D-Link DSL-2880AL Quick Installation Guide

ENGLISH
DSL-2880AL
If any of the above items are missing, please contact your reseller/retailer.
Dual Band Wireless AC1200 Gigabit ADSL2+ Modem Router (DSL-2880AL)
Power Adapter
Ethernet Cable
ADSL2+ Microlter/Splitter
Quick Install Guide
1
Power LED A solid green light indicates a proper connection to the power supply.
2
LAN (1~4) LEDs
A solid green light indicates a connection to a Gigabit Ethernet device
while an amber light indicates a connection to a 10/100 device. The
LED will blink during data transmission.
3
Wireless LED
A solid green light indicates that the 2.4G wireless segment is ready
while an amber light indicates that the 5G wireless segment is ready.
The light will blink during data transmission.
4
WPS LED The light will blink during the WPS process.
5
USB LED A solid green light indicates a connection to a USB device.
6
WAN LED
A solid green light indicates a WAN connection to a Gigabit Ethernet
device, an amber light indicates a connection to a 10/100 device and
both green and amber indicates a connection to a 10Mbps device . The
LED will blink during data transmission.
7
ADSL LED
A solid green light indicates a proper connection to the ADSL enabled
telephone line.
8
Internet LED
A solid green light indicates a proper connection to your broadband
service. The light will blink during data transmission.
9
ADSL Port
Connect to an ADSL enabled telephone line and the supplied
microlter/splitter.
10
WAN Port
Connect to an Ethernet WAN service (e.g. NBN/UFB). The LED will blink
during data transmission.
11
LAN (1~4) Ports
Connect Ethernet devices such as computers, switches, and game
consoles.
12
USB Port Connect USB devices such as printers, scanners or storage.
13
WiFi Buttons Press for three seconds to enable/disable 2.4G or 5G wireless networks.
14
Reset Button
Press and hold the reset button with a paper clip for ten seconds to
reset the router to the factory default settings.
15
Power Button Press to turn on or o the device.
16
Power Port Connect the supplied power adapter.
1 3 5 7
9
10
11
12 14 16
13 15
1
Connect your existing Phone cable from the telephone outlet to the LINE
port on the Microlter and your telephone handset into the PHONE port.
2
Connect the Phone cable from the DSL port on the Microlter to the ADSL
port of the modem router.
3
Connect the Ethernet cable from the LAN port of the modem router to the
Ethernet port on your computer.
4
Plug the power adapter into your modem router and connect to an available
power outlet.
5
6
After the modem router has powered up, verify that the Power and ADSL
LEDs are both lit.
Continue with the Conguration section on the other side of this document.
Microlter
Telephone Outlet
Package Contents
QUICK INSTALLATION GUIDE
Hardware Overview Minimum Requirements Connect your Modem Router
• Internet Provider Account Details - If you are using an Australian or New
Zeleand ADSL connection, you will need your user name and password. If you do
not have this information, contact your Internet provider.
Do not proceed until you have this information.
Before you Start
Internet Requirements:
• An activated ADSL telephone line and account with an Internet provider
Web-based Conguration Requirements:
Device with the following:
• An installed Ethernet adapter or wireless adapter
Supported Browsers:
• Internet Explorer 7 or higher
• Safari 4 or higher
• Chrome
• Firefox
Link’n Print Utility Requirements (optional):
• Windows XP/Vista/7/8
• Mac OS X (10.5, 10.6, 10.7, 10.8)
2
Dual Band
Wireless AC1200
ADSL2+ Modem Router
4 6 8
Power Adapter
DSL-2880AL
Computer
LINE
PHONE
Phone Cable
DSL-2880AL
Microlter
Ethernet Cable
DSL-2880AL
Computer

D-Link DSL-2880AL Specifications

General

Brand	D-Link
Model	DSL-2880AL
Category	Wireless Router
Language	English