DSL-G684T Wireless ADSL Router User Guide
WAN Settings window – Dynamic IP Address
To configure a Dynamic IP Address connection for the WAN, follow these steps:
1. Choose the Dynamic IP Address option from the WAN Settings pull-down menu.
2. Under the ATM VC Settings at the top of the window should not be changed unless you have been instructed to
change them. However, if you are instructed to change the VPI or VCI values, type in the values assigned for
your account. Leave the PVC and Virtual Circuit setting at the default (Pcv0 and Enabled) values for now. This
36
To Next Page
Loading...
