Need help?Do you have a question about the D-Link DSS-5+ and is the answer not in the manual?
General| Switching Capacity | 1 Gbps |
|---|---|
| MAC Address Table Size | 1K entries |
| Ports | 5 x 10/100 Mbps |
| Standards | IEEE 802.3, IEEE 802.3u |
| Jumbo Frame Support | No |
| Power Consumption | 2.5W |
Implements complete frame checking and error filtering to prevent transmitting error packages.
Supports automatic crossover detection for plug-and-play connectivity with any CAT5 cable.
Allows ports to auto-sense speed (10/100Mbps) for automatic and flexible network solutions.
Minimizes dropped packets by sending collision signals when a port's receiving buffer is full.
Eliminates error packets and runts at wire-speed for both 10Mbps and 100Mbps operation.
Provides essential steps for setting up the DSS-5+, including power outlet proximity and ventilation.
Details how to connect a computer to the DSS-5+ using appropriate Ethernet cables.
Explains how to connect a hub to the DSS-5+ using Category 5 cables for 100Mbps operation.
Guides connection of the DSS-5+ to other network devices like switches or routers.
Outlines transmission method, RAM buffer size, filtering table, and MAC address learning capabilities.
To Next Page
