11
Network Address Screen
The Network Address
screen asks for information
that is needed to connect a
VideoPhone call over the
Internet. Most home users
with a cable or DSL modem
can leave the checkbox
checked to obtain an IP
Address automatically.
If you know you cannot be
assigned an IP Address
Using the Setup Wizard (continued)
automatically through a DHCP server, then uncheck the checkbox and enter
your IP Address, Subnet mask and Gateway.
Obtain an IP Address automatically (Default)
The application will attempt to obtain the IP Address from the DHCP server.
When this is checked, the other settings on this screen are automatically
grayed. Also, if this setting is checked, you will skip the DNS screen,
described on the next page, as the DNS will be set automatically.
IP Address, Subnet mask, Gateway
If necessary, enter each of these settings for the DVC-1000. You will be able
to obtain the IP Address, subnet mask and gateway address from your router
configuration settings, ISP or network administrator.
Host name (optional):
Your Internet Service provider may require you to provide a host name to
connect to the Internet. If this is required you can enter it here. Today, this is
rarely required on a broadband connection and this setting is optional.
Press OK to continue.
To Next Page
Loading...
Need help?
General
