7
The Setup Wizard (continued)
Network Address Screen
If you manually entered an IP
address in the Network
Address screen, you will see
the screen for setting DNS
server addresses. Only the
primary DNS is required,
although entering both a
primary and secondary is
recommended.
To configure a router to work with the DVC-1000, please see the
section starting on Page 40 of the DVC-1000 manual.
Click Next
DNS Screen
Leave the Obtain an IP
address automatically
checkbox checked to obtain
an IP address and other
Internet settings automatically.
If you cannot automatically be
assigned an IP Address
(through DHCP), then
uncheck the checkbox and
manually enter the IP Ad-
dress, Subnet mask and
Gateway. Host name is
rarely used and this field is
not required.
Click Next
X
To Next Page
Loading...
Need help?
General
