22
Auto Channel
Scan:
Remote AP MAC
Address:
Select Enable or Disable. (Enable this feature to auto-select the
channel for best wireless performance.)
Enter the MAC addresses of the APs in your network that will serve
as bridges to wirelessly connect multiple networks.
Authentication:
Select Open System to communicate the key across the
network.
Select Shared Key to limit communication to only those devices
that share the same WEP settings.
Select Open System/Shared Key to allow either form of data
encryption.
Select WPA-Personal, WPA2-Personal, or WPA-Auto-Personal
to secure your network using a password and dynamic key
changes.
(No RADIUS Server required).
Open System
Shared Key
Open System/Shared Key
WPA-Personal
WPA2-Personal
WPA-Auto-Personal
Using the Configuration Menu
WDS Site Survey:
Click on the Scan button to search for available wireless networks.
Click on the network you want to connect to.
Channel:
6 is the default channel. All devices on the network must share the
same channel.
To Next Page
Loading...
