D-Link DWL-3200A

DWL-3200AP
802.11b/g Access Point
Command Line Interface Reference Manual
First Edition (January 2006)
RECYCLABLE

D-Link DWL-3200A Specifications

General

Device Type	Wireless Access Point
Data Rate	Up to 54 Mbps
Operating Range (Indoor)	Up to 100 meters
Operating Range (Outdoor)	Up to 300 meters
Interface	10/100 Mbps Ethernet
Security	WEP, WPA, WPA2

Summary

Using the CLI

Accessing the CLI

Connect to the Access Point using Telnet.

Logging into the CLI

Enter username and password to access the command prompt.

Command Help and Prompts

Use '?' or 'help' for commands and understand prompt behavior.

Command Syntax

Angle Brackets for Variables

Encloses a variable or value that must be specified.

Square Brackets for Arguments

Encloses a required value or set of required arguments.

Colon for Mutually Exclusive Items

Separates mutually exclusive items in a list.

CLI Commands

SET Commands

Commands for configuring various settings on the Access Point.

SNMP Commands

Commands for Simple Network Management Protocol.

SSH Commands

Commands for Secure Shell protocol management.

Rogue AP Detection Commands

Commands for detecting rogue access points.

First-Time Configuration Examples

Basic Network Configuration

Examples for IP, subnet mask, gateway, channel, and SSID.

Shared-Key and WPA-PSK Authentication

Examples for Shared-Key and WPA-PSK authentication setup.

WPA Authentication and Reboot

Examples for WPA authentication and device reboot.