802.11 a/g Dual Band Access Point Command Line Interface Manual
17
tftp update Update the file to the device. tftp update
tftp info Information about the TFTPC setting. tftp info
SSH Commands
ssh showalgorithm Show SSH Algorithm
ssh setalgorithm Set SSH Algorithm ssh setalgorithm [0 -12] [enable/disable]
Explanation:
Algorithm: 0:3DES
1:AES128
2:AES192
3:AES256
4:Arcfour
5:Blowfish
6:Cast128
7:Twofish128
8:Twofish192
9:Twofish256
10:MD5
11:SHA1
12:Password)
Disable 3DES algorithm support
ssh setalgorithm 0 disable
ssh showuser Show SSH User ssh showuser
ssh setrekey Set SSH Rekey ssh setrekey [0-3]
Explanation:
0:10Min
1:30Min
2:60Min
3:Never)
ssh loaddefault Load SSH Default Setting ssh loaddefault
Routing Commands (Spaning Tree Protocol)
rstp setstate Enable or Disable Spanning Tree Protocol supporting in VLAN / Multi-
SSID
rstp setstate [0:1]
Explanation: 0=disable:1=enable
To Next Page
Loading...
