802.11 a/g Dual Band Access Point Command Line Interface Manual
5
2
C
OMMAND
S
YNTAX
The following symbols are used to describe how command entries are made and values and arguments are specified in this manual. The online help contained in the CLI and available
through the console interface uses the same syntax.
Note: All commands are case-sensitive. Be sure to disable Caps Lock or
any other unwanted function that changes text case.
<angle brackets>
Purpose Encloses a variable or value that must be specified.
Syntax
set login <username>
Description
In the above syntax example, you must specify the username.
Do not type the angle brackets.
Example Command
set login accounting
[square brackets]
Purpose Encloses a required value or set of required arguments. One
value or argument can be specified.
Syntax
get multi-authentication [index]
Description
In the above syntax example, you must specify an index to be
created. Do not type the square brackets.
Example Command
get multi-authentication 2
To Next Page
Loading...
