D-Link Storage User Manual

22D-Link Surveillance Center Addon
Recording Setup
When using the Record by Schedule mode together with the Motion Detection function, you must rst click the Go to Web
link and log in to the camera’s web interface and enable the motion detection function on that camera. Please refer to the
manual of your camera for more information on enabling its motion detection function.
To the right is an example of a camera’s motion detection
conguration page.

D-Link Storage Specifications

General

Category	Storage
Type	NAS
Interface	Gigabit Ethernet
Supported Protocols	CIFS/SMB, NFS, FTP, HTTP
RAID Support	JBOD, RAID 0, RAID 1
Weight	Varies by model
Power Consumption	Varies by model
Operating Temperature	0 to 40°C (32 to 104°F)
Operating Humidity	5% - 95% non-condensing