EasyManua.ls Logo

D-NAIL 1.4 - Maintenance and Usage; Keeping Nail Clean; Cleaning Build Up Inside Dish; Maximizing Heater Lifespan

D-NAIL 1.4
6 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
KEEPING NAIL CLEAN:
After every application clean unvaporized
material with dry cotton swab.
Unvaporized material builds up as black residue.
WHEN COOL USE ISOPROPYL ALCOHOL TO CLEAN.
CLEAN BUILD UP INSIDE DISH:
1 Heat dish to approximately 900OF for several
minutes, until residue becomes ash.
2 Allow nail to cool then clean with dry
cotton swab.
GET THE MOST OUT OF YOUR HEATER:
HEATERS WILL LAST THOUSANDS OF HOURS WITH PROPER USE
A few things will dramatically reduce
the life of a heater, DO NOT:
1100 F / 600 C


RECOMMENDED HEATER TEMPERATURE:
Lower temperatures are recommended
Halo Dish Deep Dish all Quartz
550-650 F 600-650 F 650-750 F