To Next PageTo Next Page
Need help?Do you have a question about the D-Teg BRX Series and is the answer not in the manual?
General| Mobile Access | Yes |
|---|---|
| Operating System | Embedded Linux |
| Power Supply | 12V DC |
| Video Input | 4/8/16 channels |
| Video Output | HDMI, VGA |
| Mobile App Support | Yes |
| Video Compression | H.264, H.265 |
| Network Connectivity | Ethernet |
Covers essential safety warnings regarding electric shock, battery handling, and device placement.
Details the front panel components, including locks, LEDs, ports, and HDD lock functionality.
Explains the functions of front panel buttons like SER, CH, ESC, MENU, FN, STA, and arrow keys.
Illustrates the complete system wiring for ACC, battery, signals, cameras, and monitors.
Details how to switch on the main power and HDD/SSD lock, and what the POWER LED indicates.
Explains how to turn off the HDD/SSD lock and the device, and what happens to the LEDs.
Step-by-step guide for installing the DVR Viewer software and the necessary Ext2Fsd driver.
Provides detailed instructions and diagrams for calibrating the G-sensor axes based on installation orientation.
Illustrates various installation orientations and their corresponding G-sensor calibration settings (X, Y, Z values).
Details video type selection, camera FPS, recording modes (Normal/Event), and audio recording.
Explains remaining FPS, resolution, quality, event record times, encryption, and overwrite settings.
Guides on configuring motion detection sensitivity, set grid, record channels, and alarm outputs.
Details connecting removable HDD/SSD to PC via USB and loading data for search.
Explains how to search for events based on G-Sensor, signal, alarm, or speed conditions.
Explains how to back up recorded video files to a PC, including setting memo titles and folder names.
