DAB PUMPS ACTIVE DRIVER M/M 1.1 - User Manual

ACTIVE DRIVER M/M 1.1
ACTIVE DRIVER M/T 1.0 - ACTIVE DRIVER M/T 2.2
ACTIVE DRIVER T/T 3.0 - ACTIVE DRIVER T/T 5.5
DICHIARAZIONE DI CONFORMITÀ
La Ditta DAB PUMPS s.p.a. - Via M. Polo,14 - Mestrino (PD) - ITALIA - sotto la propria
esclusiva responsabilità dichiara che i prodotti summenzionati sono conformi a:
Direttiva della Compatibilità elettromagnetica 2004/108/CE e successive modifiche.
Direttiva Bassa Tensione 2006/95/CE e successive modifiche.
DÉCLARATION DE CONFORMITÉ
La société DAB PUMPS s.p.a. – Via M. Polo, 14 – Mestrino (PD) – ITALY – sous sa propre
responsabilité exclusive déclare que les produits susmentionnés sont conformes à:
Directive de la Compatibilité électromagnétique 2004/108/CE et modifications successives.
Directive Basse Tension 2006/95/CE et modifications successives.
DECLARATION OF CONFORMITY
The Company DAB PUMPS s.p.a. – Via M. Polo, 14 – Mestrino (PD) – ITALY – under is own
exclusive responsibility declares that the products listed above comply with:
Directive on Electromagnetic Compatibility 2004/108/CE and subsequent modifications.
Directive on Low Voltage 2006/95/CE and subsequent modifications.
KONFORMITÄTSERKLÄRUNG
Die Firma DAB PUMPS s.p.a. – Via M. Polo, 14 – Mestrino (PD) – ITALIEN – erklärt
eigenverantwortlich, dass die vorstehend beschriebenen Produkte den folgenden Richtlinien
entsprechen:
Richtlinie zur elektromagnetischen Verträglichkeit 2004/108/CE und folgende Änderungen.
Niederspannungsrichtlinie 2006/95/CE und folgende Änderungen.
CONFORMITEITSVERKLARING
De firma DAB PUMPS s.p.a. – Via M. Polo, 14 – Mestrino (PD) – ITALY – verklaart onder
haar eigen, exclusieve verantwoording dat de hieronder genoemde producten voldoen aan:
Richtlijn elektromagnetische compatibiliteit 2004/108/CE en successievelijke wijzigingen.
Laagspanningsrichtlijn 2006/95/CE en successievelijke wijzigingen.
DECLARACIÓN DE CONFORMIDAD
La empresa DAB PUMPS s.p.a. – Via M. Polo, 14 – Mestrino (PD) – ITALIA – declara bajo su
total responsabilidad que los productos anteriormente mencionados cumplen la:
Directiva de Compatibilidad Electromagnética 2004/108/CE y sucesivas modificaciones.
Directiva de Baja Tensión 2006/95/CE y sucesivas modificaciones.
FÖRSÄKRAN OM CE-ÖVERENSSTÄMMELSE
Företaget DAB PUMPS s.p.a. – Via M. Polo 14, Mestrino (PD) – ITALIEN – förklarar på eget
ansvar att ovannämnda produkter är i överensstämmelse med:
EMC-direktivet 2004/108/EEG jämte ändringar.
Lågspänningsdirektivet 2006/95/EEG jämte ändringar.

Summary

General Information

Safety Warnings and Precautions

Skilled Personnel Requirement

Installation must be performed by qualified and experienced individuals.

Electrical Safety Compliance

Use is permitted only if the electrical system complies with safety regulations.

Manufacturers Responsibility Disclaimer

Manufacturer is not liable for damage from tampering or incorrect use.

Specific Operational Warnings

Safety precautions before electrical/mechanical work, high voltage warnings.

Product Applications

Technical Data and Usage Limitations

Electrical Connections to Electropump

Power Supply Connection

Hydraulic Connections

Characteristics, Interpretations, and Operation

System Features and Components

Overview of the system's features, inverter, sensors, and inputs/outputs.

Keyboard Factory Settings Operation

Initial Start-up Operations

Setting Rated Current (rC)

Set the electropump's rated current based on the data plate.

Setting Rated Frequency (Fn)

Set the electropump's rated frequency according to the data plate.

Setting Motor Rotation Direction

Adjust motor rotation direction if it is incorrect.

Setting Setpoint Pressure

Set the desired operating pressure for the pump.

Parameters for the User

Setting Set Point Pressure (SP)

Set the desired operating pressure for the pump.

Parameters for the Installer

Setting Rated Current (rC)

Set the electropump's rated current based on the data plate.

Setting Rotation Direction (rt)

Adjust motor rotation direction if it is incorrect.

Setting Rated Frequency (Fn)

Set the electropump's rated frequency according to the data plate.

Setting Operating Mode (od)

Select the operating mode for the ACTIVE DRIVER.

Technical Assistance Displays and Settings

Setting Water Lack Blockage Reaction Time (tb)

Set the delay for indicating a lack of water.

Setting PI Proportional Gain (GP)

Adjust the gain for the PI controller's proportional coefficient.

Access to Manual Mode

Setting Rotation Direction in Manual Mode

In manual mode, invert motor rotation direction.

Starting and Stopping the Electropump

Start or stop the electropump in manual mode.

General System Reset

Restoring Factory Settings

Error and Status Conditions

Display Indications and Settings

User Displays and Settings

Parameters for user access, including set point, current, frequency, and direction.

Installer Displays and Settings

Parameters for installer access, including current, frequency, mode, and interconnection.

Technical Assistance Displays and Settings

Parameters for technical assistance, including reaction time, PI gains, and frequency limits.

Main Value Displays

Displays of current operating values like frequency, pressure, and current.

Monitor Displays

Displays for monitoring flow, frequency, temperature, status, and error history.

Access to Manual Mode Parameters

Access to manual mode for testing and control.

DAB PUMPS ACTIVE DRIVER M/M 1.1 Specifications

General

Brand	DAB PUMPS
Model	ACTIVE DRIVER M/M 1.1
Category	Control Systems
Language	English