When Automatically print, Data output selection
F42
●
0
When weight reached Empty Range(F80 set value), Automatically
print.
1
Over than Empty Range, Steady Lamp is “ON”, Automatically Print.
- Will not check Empty Range
Print Format selection
F43
● 0
Continuous Print
Serial No. and Weight will be printed continuously.
1
Single Print
Date, Time, S/N, ID No. Weighing Data will be print
SUB/GRAND Total Data Delete selection
F44
●
0
Manual Delete Mode
SUN Total Delete : “Clear” key + “SUB” key
GRAND Total Delete : “Clear” key + “GRAND” key
1
Automatic Delete Mode
After SUB/GRAND Total Print, Automatically Deleted.
Paper Withdraw Rate setting (After Finish Printing process)
F45 4
0
+
9
Whenever set value increased, 1line will be added.
Printer Line Interval Selection (Only for Continuous Printer format)
F46 1
0
+
9
Whenever set value increased, 1line will be added.
Printing Language Selection
F47
●
0 KOREAN
1 ENGLISH
Print Delay time Setting
F48 00
00
+
99
00 : No Delay time
0.1~9.9 : 9.9sec later, print output
23 / 41
To Next Page
Loading...
