5-5. Function List
No.
Contents Remark
F01 Decimal point setting Setting range : 0~3
F02 Back up mode selection Setting range : 0, 1
F03 Motion Band setting Setting range : 0~9
F04 Zero Tracking setting Setting range : 0~9
F05 Auto Zero Range setting Setting range : 00~99
F06 Digital Filter setting Setting range : 00~49
F07 Zero / Tare key activating setting Setting range : 0, 1
F08 Zero key operating range setting Setting range : 0~4
F09 Tare key operating range setting Setting range : 0~3
F11 Digital Input setting Setting range : 0~2
F21 Weighing Mode Selection Setting range : 1~4
F22 Weighing Finish Relay “ON” delay time setting Setting range : 0.0~9.9sec
F23 Weighing Finish Relay “ON” Duration time setting Setting range : 0.0~9.9sec
F24 Weighing Judge Relay “ON” delay time setting Setting range : 0.0~9.9sec
F25 Weighing Judge Relay “ON” Duration time setting Setting range : 0.0~9.9sec
F31 Serial I/F Communication Speed setting Setting range : 0~8
F32 Serial I/F Mode setting Setting range : 0~2
F33 Serial I/F Transference Method setting Setting range : 0~3
F34 ID Number setting Setting range : 1~99
F35 Transferred Data Format setting Setting range : 0, 1
F36 Data Transferring count setting Setting range : 0~6
F40 Weight Unit Selection (Printer) Setting range : 0~2
F41 Weight Display Speed selection Setting range : 0, 5, 9
F42 When Automatically print, Data output selection Setting range : 0, 1
F43 Print format selection Setting range : 0, 1
F44 Sub-Total Data delete Selection Setting range : 0, 1
19 / 49
To Next Page
Loading...
