PAGE 15 / 53
5-4. Function Setting – Mode 1.
- Applicable model : MI – 1000/2000/3000/4000 series
To make more accuracy performance of Digital Weighing Indicator, through this Function setting.
Step 1. Enter to Function setting mode.
Turn on the Power + with pressing display
Press key display
Press key to start “F-function Mode”.
Step 2. Change the F-Function No.
To change the F-function No., press key. whenever pressing key, Function No. will
be changed
If you want to move certain function No. directly, press function No. with keypad and press
key.
Step 3. Change the Set value.
Input new set value with keypad, and press key to save new setting.
If you don’t press key, after changing the set value, the new set value will not be saved.
Step 4. Exit from Function setting mode.
Press + + key to exit function mode.
To Next Page
Loading...
