dacell DN520N - Page 18

PAGE 17 / 53
F50
Weight Unit Selection (Printer)
Setting range : 0~2
Function
No.
Contents
Remark
F51
When Automatically print, Data output selection
Setting range : 0, 1
F52
Print format selection
Setting range : 0, 1
F53
Sub-Total Data delete Selection
Setting range : 0, 1
F54
Paper withdraw rate Selection
Setting range : 0~9
F55
Print Line interval Selection
Setting range : 0~9
F56
Sub-Total Print Mode Selection
Setting range : 0, 1
F57
Print Language Selection
Setting range : 0~3
F58
Print Delay time selection
Setting range : 0.0~9.9sec
F59
Auto Print Setting
Setting range : 0, 1
F60
BCD output Selection
Setting range : 0, 1
F63
Average Display setting
Setting range : 00~99
F64
Steady LED Status Lamp Delay time setting
Setting range : 0.0~9.9sec
F65
Tension and Compression setting
Setting range : 0, 1
F80
Empty Range
Setting range : 0~Max. Capa
F81
Zero Range Setting
Setting range : 0~Max. Capa
F83
Analogue output setting
Under option installed
F89
Span Value check
F90
Date check / change
F91
Time check / change