dacell DN520N - Page 33

PAGE 32 / 53
Printing Language Selection
F57
●
0
KOREAN
1
ENGLISH
Print Delay time Setting
F58
00
00
∫
99
00 : No Delay time
99 : 9.9sec later, print output
Auto Print Setting
F59
●
0
Manual Mode : Print output, when key input.
1
Auto Mode : Print Output, when Finish Relay output.
BCD output Selection
F60
●
0
Positive output
1
Negative output
Average Display setting
F63
00
00
∫
99
00 setting : Average Display mode not use
99 setting : make average every 99pcs display data and display
Steady LED Status Lamp Delay time setting
F64
00
00
∫
99
00 setting : No delay for the Steady LED lamp
99 setting : Delay during 9.9sec, and LED lamp will be ON.
Tension and Compression setting
F65
●
0
Not Use (JP1 switch OFF at main board)
1
Use (JP1 switch ON at main board and then must be re-calibration)