dacell DN520N - Page 5

PAGE 4 / 53
3. SPECIFICATION
3-1. Analog Input & A/D Conversion
Input Sensitivity
0.2㎶ / Digit
Load Cell Excitation
DC 10V ( - 5V ~ + 5V )
Max. Signal Input Voltage
Max.32mV
Temperature Coefficient
[Zero] ±20PPM/℃
[Span] ±20PPM/℃
Input Noise
±0.6㎶ P.P
Input Impedance
Over 10㏁
A/D Conversion Method
Sigma-Delta
A/D Resolution(Internal)
520,000 Count(19bit)
A/D Sampling Rate
Max. 200times / Sec
Non-Linearity
0.01% FS
Display Resolution(External)
1/30,000
3-2. Digital Part
Display
Parts
Specification
Display
Main Display
7Segments, 6digits Red color FND
Size :20.0(H) ×13.0(W)mm
Sub Display
7Segments, 14digits Red color FND
Size :9.2(H) ×4.8(W)mm
Min. Division
×1, ×2, ×5, ×10, ×20, ×50
Max. display value
+999,950
Under Zero value
"-" (Minus display)
Status lamp
Steady, Zero, Tare,
Hold, Low, Hi, Finish,
RTxD
Green color Condition display Lamp (8pcs)
K e y
Number, Function Key
Number Key, Function (12pcs)