24
Adjusting the Glass Shelves
Removing the Shelves
The refrigerator shelves are glass. Therefore, they are
heavy and - although made from safety glass - are
breakable.
User Instructions
Use both hands when removing and installing all shelves
and drawers.
1. Place the palms of your hands (face-up) underneath
the shelf toward the back rails 1 .
2. Keeping the shelf level, lift the entire shelf straight up
to disengage the lock 2 .
Make sure the front is not tilted higher or lower than
the back of the shelf.
3. Pull the shelf toward yourself 3 .
Installing the Shelves
1. Place your hands at the back corners of the shelf 1
Balance the shelf in the palms of both hands.
2. At the same time, insert each back prong into its notch
located in the shelf rail 2 .
3. Make sure to perform Steps 1-2 for both sides of the
shelf at the same time.
Removing Glass Shelves
rail
1
2
3
1
2
3
1
1
2
2
rail
prong
Installing Glass Shelves
To Next Page
Loading...
