DAD Event series - Technical Specification; Models EVENT8 A, EVENT8, EVENT10 A, EVENT10

18
EVENT series
ENIT
SPECIFICHE TECNICHE - TECHNICAL SPECIFICATION
EVENT8A EVENT8 EVENT10A EVENT10
System type
Active Passive Active Passive
Rated System Power
120 W rms 100 W AES 200 W rms 220W AES
Sensitivity (1W@1m)
- 93 dB - 94 dB
Max Calculated SPL
114 dB 119 dB/ 400 W peak 118 dB 122 dB/ 880 W peak
Impedance
- 8 Ohm - 8 Ohm
Frequency Response
80 - 20000 Hz
(+/- 3 dB)
80 - 20000 Hz
(+/- 3 dB)
70 - 20000 Hz
(+/-3dB)
70 - 20000 Hz
(+/-3dB)
Crossover Frequency
3,3 kHz 2 kHz 3,5 kHz 2 kHz
LF Driver/Voice Coil
8”/2” 8”/1,5” 10”/2” 10”/2,5”
HF Driver
1” compression
driver
1” compression
driver
1” compression
driver
1” compression
driver
Horn coverage (HxV)
90° x 50° 110° x 60° 90° x 50° 110° x 60°
Flying System
3 x M8 3 x M8 3 x M8 3 x M8
Sockets
XLR/Jack balanced/
Pin RCA Unbalanced
2x 4p speakon
connectors
XLR/Jack balanced/
Pin RCA Unbalanced
2x 4p speakon
connectors
AC Input
110/220 V AC 50/60 Hz - 110/220 V AC 50/60 Hz -
Net Weight
9 kg 8 kg 14 kg 10,7 kg
Shipping Weight
10 kg 9 kg 15,5 kg 12,2 kg
Dimensions (WxHxD)
290x420x225 mm 290x420x225 mm 360x515x270 mm 360x515x270 mm