1
-
25
WARNING
•
Use of the front loader and of
the tractor equipped with front
loader, if not correctly carried
out, and handling not secured
loads constitute a serious dan-
ger for the operator and every-
one standing by, because of the
danger of falling objects.
H11O105A
• Three-point hitch and side mounted
implements make a much larger
arc when turning than towed equip-
ment. Make certain to maintain
enough clearance for safe turning.
• To use mounted, semi-mounted
or towed equipment and trailers it
is required to use exclusively CE
marked implements, after reading
their operation handbooks carefully,
giving maximum attention to risks
connected with their association to
the tractor.
• Implements must be hitched to the
tractor by means of the three-point
linkage. It is therefore necessary
to check couplings for compatibility
according to their classes.
The implement has to be tted with
suitable supports in order to avoid
tipping or accidental shifting during
hitching. Always check three-direc-
tional fastening to the tractor of the
mounted or semi-mounted imple-
ment, to avoid dangerous swinging
and shaking during transport and
work that could jeopardize the sta-
bility of the tractor implement as-
sembly.
• The cardan shaft must be always
CE-marked, provided with suitable
guards and suitable to tractor-im-
plement coupling. Follow all di-
rections of the operation manual,
concerning both the fastening
according to connection direction
and safety rules to avoid rotation of
protections (chains) and overlaying
of the telescopic tubes. Also keep
articulation angles.
WARNING
•
When a tractor with safety
frame is equipped with a front
loader, there is still a risk if the
implement is improperly used.
This risk is due to objects falling
from above. The operator has
no protection against this risk.
OM_TC230(CK2620,3520,4020)-EN_USA-01.indd 25OM_TC230(CK2620,3520,4020)-EN_USA-01.indd 25 2023-09-21 오후 5:19:322023-09-21 오후 5:19:32
To Next Page
Loading...
