DAELIM ET250 User Manual

Identifies the location of all controls and parts on the ATV.

The electric starter button is located on the left handlebar for engine ignition.

Lever on the left handlebar to operate the carburetor choke system for cold starts.

Lever on the right handlebar to control acceleration and speed.

Details the operation of front, rear, and simultaneous brakes.

Information about the fuel tank, its cap, and vent system.

Explains the three positions (ON, RES, PRI) of the fuel valve.

Details the function and maintenance of the inline fuel filter.

Guidelines for inspecting tires and wheels for damage and wear.

Recommended tire pressure for safe operation.

Explains the fuel gauge and its function.

Describes the reverse indicator lamp and transmission shifter.

Details the digital speedometer and odometer functions.

Pre-ride checks to ensure ATV is safe for operation.

Recommends wearing protective riding gear for safety.

Step-by-step guide for starting the engine and warming it up.

Guidelines for breaking in the new ATV to ensure longevity.

Fundamental riding advice for safe operation and control.

Guidance on maintaining proper posture for comfort and control.

Techniques for turning an ATV safely, considering its rear axle.

Tips for practicing riding skills to improve proficiency.

Procedure for safely shifting into and operating in reverse gear.

Advice on maintaining safe distances and respecting the environment.

Details the manufacturer's obligation under the limited warranty.

Outlines the owner's responsibilities for maintenance to maintain warranty.

Specifies the duration of the vehicle's warranty coverage.

Lists conditions and items not covered by the warranty.

Instructions for adjusting the throttle cable for proper free play.

Procedures for replacing the spark plug at the start of each season.

Details the maintenance of the vehicle's hydraulic disc brake systems.

Procedure for bleeding air from the hydraulic brake system.

Instructions for refilling the brake fluid reservoir with specified fluid.

Information on checking and adjusting the drive chain's tension and lubrication.

Guidelines for maintaining the air filter for optimal engine performance and longevity.

Procedures for checking and maintaining the engine's cooling system and coolant levels.

Instructions for checking and changing the engine oil to ensure proper lubrication.

Guidance on checking and changing the transmission oil for gear lubrication.

Information on the location, type, and maintenance of the vehicle's battery.