12
The vehicle is equipped with three point type(driver’s)
and reel type(passenger’s)
Every person who drives or rides in this vehicle
should wear a seat belt at all time.
The buzzer will sound, if the driver’s seat belt is not
fastened when the ignition switch is turned to the
“ON” position.
1) Pull the belt evenly out of the retractor and guide
it across the body making certain that it is not
twisted.
The seatback should not be in a reclining position
anymore than needed for comfort.
2) Insert the metal latch plate ڹ into the buckle ں.
3) To remove the belt, depress the red push button
on the buckle.
And the belt wil roll up automatically.
4) When the driver’s seat belt is not in use, adjust
the latch plate ڹ within 10
cm
from the seat loop.
The belt must not be twisted when fitted.
Do not wear the shoulder belt across the neck or
under your outer arm.
Seat Belts
To Next Page
Loading...