13
Seat belt warning lamp
The seat belt warning lamp comes on
when the ignition switch is placed in
the “ON” position unless the driver’s
seat belt is securely fastened.
1. Never use the belt for more
than one person at a time.
2. Never wear the belts twisted.
3. Make sure seat belts or their
attachments not to be thrusted
in metal parts of the seat or
the door.
4. Seat belts should be adjusted
as firmly as possible.
5. Do not wear seat belts low
under your shoulder.
6. If you replace your seat belts
incorrectly, you may by injured
by hardware of the belts at
sudden stops.
7. Do not wear your seat belts
with hard or breakable objects
such as glasses, pens, etc. put
into the pocket of your upper
garment.
NOTICE
1. Periodically inspect all parts of
the belts and replace any dam-
aged parts.
2. Make sure that the belts are
not to be damaged by sharp
edged objects.
3. The belts should be changed if
webbing has become frayed or
damaged.
4. Check if fixing bolts have been
firmly installed to the floor.
5. Always keep the seat belts
clean and dry.
6. Clean only with tepid soapy
water.
7. Do not bleach or dye seat
belts.
CAUTION
To Next Page
Loading...