194
ANTIFREEZE PUMP (OPTION)
Application
The antifreeze pump is used in brake
systems in order to inject an anti–
freeze based on glycol or alcohol dur-
ing winter operation. This makes it
unnecessary to unscrew the pipe con-
nection. If the vehicle is operated
without trailer, the pump must be
actuated one or several times before
sitting off, the number of strokes
being dependent on the temperature
and humidity of the air(see instruction
plate on reservoir).
In case the vehicle is operated with
trailer with a consequently higher air
consumption, the plunger rod must
accordingly be depressed more often.
To Next Page