19
Wiper speed control switch
The desired intermittent operation
time can be controlled by turning the
knob when the wiper switch is in
“INT” position.
Windshield washer switch
To let washer fluid spray on the wind-
shield, press and hold the center but-
ton of switch.
And the windshield wipers are simul-
taneously operated for 2–3 cycles.
Exhaust brake switch
The exhaust brake system is
designed to shut off exhaust pipe
when the engine brake is applied,
resulting in assisting brake action.
When the switch lever is pushed
downward, and clutch and accelerator
pedals are released, the indicator
lamp comes on showing that the
exhaust brake is in operation. When
the clutch and accelerator pedals are
depressed, the exhaust brake stops
working.
Hazard warning flasher switch
When the right–hand lever is pushed
upward, all the turn signal lamps are
made to flash regardless of the turn
signal switch position.
The hazard warning flasher switch is
to be used when your vehicle gets in
a traffic hazard or is parked in the
darkness.
To Next Page
Loading...