8
APPLICATION
Continuous service
Used as main power supply to generate electricity for several purposes: motion force, lighting,
heating etc. The generator sets can continue running and allow 10% over load for 1 hour per 12
hours under variable load, which is used for remote area.
Standby service
Used as standby power supply to provide continue electric power for non‐invariable loads. The
generator set is suitable for the area where must ensure continue power supply, such as hospi-
tals, industrial facilities, airports etc. Keep the generator set standby state at any time and st
art to run when the mains supply is abnormal.
Emergency service
Used as auxiliary power supply to solve energy interruptions that may cause serious problems
to people, physical and /or financial damage or to face consumption peaks. The generator set
can start in short order to provide steady electric power for the loads when the mains supply
happen abnormity, and switch to stop after the mains supply becomes normal. Generally the
generator set continues working for several hours.
3. OPERATION INSTRUCTION FOR FIRST START
1) Inject water/oil/diesel