Daewoo DBP2500 - User Manual

Questions and Answers

J
Jeffrey HernandezAug 5, 2025
What to do if my Daewoo DBP2500 Water Pump stops running suddenly?
- S
  sullivanmichaelAug 5, 2025
  If your Daewoo Water Pump stops running suddenly, there might be several reasons: * The switch may be off, or the fuse may be burned out. Inspect if the head and voltage of power meet the requirement and adjust accordingly. * The power supply may be cut off, or one phase may be lost. Find out the reasons and settle it. * The impeller may be clogged. Clean the impurity away. * The stator windings may be burned. Change the winding and repair.
D
David CordovaAug 15, 2025
Why is my Daewoo DBP2500 Water Pump not starting?
- C
  Cynthia FisherAug 15, 2025
  If your Daewoo Water Pump is not starting, consider these potential causes: 1. The voltage may be too low. Adjust the voltage between 342~418. 2. The power supply may be cut off, or a phase may be lost. Find out the reasons and settle it. 3. The impeller may be clogged. Dismantle the strainer and pump casing, move the impurity away, and correct the clogged position. 4. The cable may be broken, or the plug may be damaged. Replace the cable or plug. 5. One phase may be lost. Check the wire terminal in the switch and cable. 6. The stator winding may be burned. Exchange the windings and repair it.
D
djonesAug 25, 2025
What causes low capacity in a Daewoo Water Pump?
- J
  Jill MckinneyAug 26, 2025
  Low capacity in your Daewoo Water Pump can be attributed to several factors: * The head might be too high; ensure it is within the appropriate head range. * The strainer might be clogged. Clean away impurities such as weeds. * The impeller might be badly worn. Change the impeller. * The depth of the pump under the water may be too shallow, causing air to be sucked in. Adjust the depth.