EasyManua.ls Logo

Daewoo DLM5080SD - Storage; Technical Data

Daewoo DLM5080SD
99 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
21
7. STORAGE
Store the mower in a cool, clean, dry place.
Preparing the Mower for Storage
A WARNING
Gasoline vapors can explode.
• Do not store the mower in an enclosure near an open ame.
Allow the engine to cool before storing it.
4. Always add fuel atabilizer to the fuel as directed by the fuel stabilizer
manufacturer.
Remove spark plug and spray a light fog of penetrating oil, such as
WD-40 into the spark plug hole; Then pull the starter rope
5. Remove spark plug and spray a light fog of penetrating
oil, such as WD-40 into the spark plug hole; Then pull the starter rope.
6. Install the spark plug and tighten it with a wrench to 15 ft-lb (20 N-m).
7. Tighten all nuts, bolts, and screws.
8. Leave spark plug cable disconnected.
8. TECHNICAL DATA
Drive type: Hand push
Cutting heights: 25-75 mm with 5 grades
Height adjustment: Centre adjustment
Cutting width: 510 mm(20”)
Blade: Straight blade
Deck material: steel
Front/Rear wheel: 7/11 inch K
Wheel materials(pp/pp+pvc): PP+PVC
Soft grip on the handle: Yes
Catching type: Side discharge/Mulching
ENGINE
Displacement (cc): 173 cc
Engine Model: DV170
Starting System: Recoil
Power MAX(kw): 3.0 kW
Rated speed: 2800 rpm

Related product manuals