22
PR/PAGE
SELECT
OK
PR/PAGE
Picture Mode Dynamic
Brightness 41
Contrast 51
Colour 31
Sharpness 31
Tint
R G
0
N.R. Off
Colour Temp Normal
Select Access Exit
Picture
Screen
Sound
Install
Function
DVB
Picture Mode Dynamic
Brightness 41
Contrast 51
Colour 31
Sharpness 31
Tint
R G
0
N.R. Off
Colour Temp Normal
Select Access Exit
Picture
Screen
Sound
Install
Function
DVB
Method To Use
Basic Menu
Basic Menu
- The basic menu appears on the screen if you press the “
MENU
” button of the remote control.
- There are 6 items Picture, Screen, Sound, Install, Function and DVB in the basic menu.
- Each item has sub-items under it. If the desired item is selected, the relevant sub-items are displayed upward.
1. Press the “
MENU
” button.
• The main menu appears if you press the “
MENU
” button.
2. Press the “/“ button.
• You may setup according to the directions on
the screen after selecting the desired item by
pressing the “/“ button.
• If the setup is completed, exit from the menu
by pressing the “
MENU
” button.
Picture : Adjusts Picture Mode, Brightness, Contrast, Colour, Sharpness, Tint (NTSC only),
N.R. (Picture Noise Reduction) and Colour Temperature.
Screen : Adjusts Aspect and PC (activated on PC mode only).
Sound : Adjusts AVC (Automatic Volume Control), Effect, Balance and Equalizer.
Install : Adjusts Auto Tuning, Manual Tuning, Setup and Edit.
Function : Adjusts Language and Child Lock (additionally adjusts Light Effect in DLT-19L1/
L2, DLT-22L1/L2 only).
DVB : Adjusts DVB Menu and Software Update (activated on DVB-T only).
To Next Page
Loading...
