EN
29
Handset Menu function 3: BS SETTINGS
Press
key, then press key to select BS SETTINGS, and then press
to enter the
followings:
* DELETE HANDSET
This function allows the user to delete a handset registration from the base.
1) Press
key, the rst show is DELETE HS.
2) Press
key to enter, the user will be prompted to enter the PIN code.
3) Input the correct 4-digit pin code using digit key.
4) Press
or key to scroll the handset names list up and down.
5) Press
key to con rm. The delete handset will be deleted from the list on registered
handset on the base, and the handset will behave according to the out of range
condition.
* DIAL MODE
It is able to change the mode in which the base will dial.
1) Press
key, then press or key to select DIAL MODE item.
2) Press
key to enter, and the display shows TONE.
3) Press or key to select the TONE or PULSE dial mode.
4) Press
key to con rm your selection.
* FLASH TIME
1) Press
key, then press or key to select FLASH TIME item.
2) Press
key to enter.
3) Press or key to select the desired ash time among 100ms, 300ms, 600ms and 1000
ms.
4) Press
key to con rm your selection.
* MODIFY PIN
This function allows changing the pin number of the currently active base.
1) Press
key to con rm.
2) Then press or key to select MODIFY PIN item.
3) Press
key to con rm, and the display shows PIN?.
4) The user will rst be requested to entry the existing PIN code for the base by using
numerical keys, then press
to con rm.
5) If the old code is validated, the user will be prompted to enter a new PIN code (4 digits),
press
to con rm.
6) Once a new PIN code has been entered, the user will be requested to repeat to input the
new PIN code.
7) Press to con rm, the code will be stored to the base and a tone sounded.
To Next Page
Loading...
