EN
30
* BASE DEFAULT
This function allows restoring the base setting to the factory default.
1) Press key, then press or key to select BS DEFAULT item.
2) Press key to con rm.
3) The user will be prompted to enter the PIN CODE, the display shows PIN?, then press
numerical keys to input code.
4) If the PIN code is validated all base settings will be returned to the factory default.
Handset Menu function 4: HS SETTINGS
It is able to change a number of the settings for the handset to their own individual
preferences. Use
or key to select HS SETTINGS. Then you can do below:
* ALARM
It is able to set the alarm on the handset and adjust the alarm settings.
1) Press key, the rst sub-menu is ALARM item.
2) Press key to con rm.
3) Press or key to select ON or OFF, and press to con rm .Selection of ALARM OFF
will turn the alarm o , and the user is dropped back to the “ALARM” menu. Selection
of ALARM ON option will turn the alarm on; the user will be requested to set the alarm
time.
4) After select ON, press key to start the time settings of alarm, 00-00 displayed and
the hour “00” ashing,
5) Press or key to edit the alarm time.
6) Press key, the user will be presented with a further option to select to SNOOZE ON
or SNOOZE OFF to enable or disable the snooze function on the alarm.
7) Press key to con rm your selection. And the alarm icon will show on LCD.
·
Startup alarm:
In idle state, the alarm will ring at very sharp hour you have set.
·
Intermit alarm:
During the alarming, press any key except
key, and will begin to ring after 6 minutes.
When a call comes, the alarm will be intermitted too.
·
Close alarm:
Press
key to close alarm or enter alarm setting state, select OFF.
* RING SETUP
It is able to change the handset ringing on internal calls and external calls. There are 10
ringer melodies and 5 di erent volume levels can be set.
1) Press
key, then press or key to select RING SETUP item.
2) Press
key to enter.
To Next Page
Loading...
