Daewoo DTD-1400 - Handset Customization and Settings; Ringtone and Volume Setup; Tone Setup; Language Selection

EN
31
3) Press or key to select the INT RING and EXT RING setup.
4) Press key to con rm.
5) Press or key to select the MELODY and VOLUME setup.
·
If select MELODY,
a) Press key to con rm.
b) Press or key to select desired melody, the corresponding melody is playing
alongside.
c) Press key to con rm your selection.
·
If select VOLUME,
a) Press key to con rm.
b) Press key to select desired ringer volume 1- 5, the corresponding volume sound
can be heard. If you want to switch o , select VOLUME OFF.
c) Press key to con rm your selection.
Notes:
1) If you select VOLUME OFF for INT RING, when transfer call to this unit, it will not ring;
2) If you select VOLUME OFF for EXT RING, there will be a ringing o icon display on
LCD and when there is an incoming call, the handset will not ring. (Shortcut key: press
and hold key to switch the handset external call ring on/o )
* TONE SETUP
It is able to change the handset tone settings.
1) Press key, then press or key to select TONE SETUP item.
2) Press key to enter.
3) Press or key to select the KEY TONE and BATTERY LOW, RANGE ALARM setup.
4) Press key to con rm.
5) Press or key to select the ON or OFF to enable/disable the sounding of a beep
respectively.
6) Press key to con rm your selection.
Notes: after this setting,
1) a beep for key tone will sound when a key is pressed on the handset.
2) a beep for battery low then the battery is low.
3) a beep for range alarm will sound when the handset is out of ringed of the base
* LANGUAGE
1) Press
key, then press s or key to select LANGUAGE item.
2) Press
key to enter.
3) Press
or key to select the language among ESPAÑOL (Spanish), ENGLISH (English),
DEUTSCH (German), FRANÇAIS (French), ITALIANO (Italian), PORTUGUES (Portuguese),