10
CONNECTION
1. Remove 2 screws on the cover B. 2. Separae harness as connectors.
R eplacing Motor For Spin And Was h
3. Remove bolt and nut on the upper side of the drum
coupling as and lift up the basket spin.
4. Remove 1 screw fixing cabinet.
7. Remove 3 screws on the base and Remove wash
motor.
8. Remove 3 screws and spin motor.
5. Remove bolt connecting motor pulley and pulsator
pulley.
6. Remove panel front and 3 screws on flange of the
tub. And lift up the tub assembly.
To Next Page
Loading...
