1. Download the Daewoo Home connect app. Follow the
in-app instructions to create an account and sign in. Allow
all notifications.
2. Plug in your smoke generator. After powering on, your
device stays 60 seconds in pairing mode, it cannot be
triggered. Press the RF remote control 3 times (with 1s
interval), the green light flashes, the pairing status is on.
2. In the top right corner of the app home page, select ADD
DEVICE, the system will automatically detect your smoke
generator.
Tap to add the device.
If your application does not automatically detect your
device, select it from the list of devices available for addition.
3. Then WIFI and password are required. Please choose
2.4Ghz wifi for your phone, and enter the wifi password,
click NEXT (this step requires your BLUETOOTH & LOCATIONS
permissions).
4. If the green light on the device changes from flashing to
solid, pairing was successful.
4.Device re-pairing: Turn off and restart the device, within
60 seconds of pairing time, press the remote control 3
times continuously (each interval is 1s), after the green light
flashes.
The device can be re-paired again.
Please DO NOT re-pair the device after 60 seconds of
rebooting the device to avoid false fog triggering.
To Next Page
Loading...