EasyManuals Logo

Daewoo FD Series User Manual

Daewoo FD Series
61 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #28 background imageLoading...
Page #28 background image
25
ELECTRONIC CONTROLLER INSTRUCTION
No Function
Controlled
Description
Part
4 Defrost Compressor
Function F-fan
C-fan
5 Defrost Compressor
Function F-fan
C-fan
1. During defrost function, comp. goes off and F-fan goes ON.
2. Maximum defrost time is 70 minutes.
3. Defrost function is controlled by time interval setting.
4. Time interval can be set by shifting dip s/w on the PCB.
5. Time interval setting is as follows.
Dip Switch Cycle time
No.1 No.2 (hours)
00 60
10 48
01 36
11 24
6. Factory setting is 24 hours
7. The first defrost function will start at the half value of setting time.
1. If it becomes defrost cycle time, the refrigerator executes defrost function.
2. Defrost method is to operate only F-fan with comp. off.
3. Defrost function terminates when D-sensor temperature comes to above
50.0˚F(10˚C).
4. During defrost period, LED on the PCB does not display dF but inside
temperature, in difference to Freezer Model. But, if inside temperature is
above 39.2˚F(4˚C) during defrost period, LED displays 39.2˚F(actually 39),
imaginarilly.
5. After defrost completed, if inside temperature comes to go down below
39.2˚F(4˚C), LED displays real time temperature.
FD,SD-650R,1250R¿ 12– ` (¿) 02.8.21 4:48 PM ˘`25

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Daewoo FD Series and is the answer not in the manual?

Daewoo FD Series Specifications

General IconGeneral
BrandDaewoo
ModelFD Series
CategoryRefrigerator
LanguageEnglish

Related product manuals