Daewoo FRS-2011 - ERROR HANDLING AND SYSTEM CONTROL

26
OPERATION AND FUCTIONS
Error Display (LCD Display of F-PCB)
E1
I sensor; disconnection, short
EF
FLOW sensor; disconnection, short
Et
Level sensor sw error
E9
Water supply Error
EA
Continuously Ice drop 3times at Et.
Eu
Fully Ice sensor sw error
INPUT Control Object
1. Temperature Control Buttons CUSTOM LCD
CONTENTS REMARKS
1. How to start
1) Set "LOCK ON" first.
2) Push "Refrigerator Set" button 5 times while pushing "Freezer Set" button.
2. Display
Error code is displayed on Freezer temperature display part.
3. How to stop
1) Push "LOCK" button 3 times while pushing "REF SET." button.
2) It stops automatically 4 minutes after the start.
4. All the error Ccdes are reset if they turn to be normal.
5. Error Code
ERROR CODE CONTENTS
F1 F-sensor ; disconnection, short(pull-down)
r1 R-sensor ; disconnection, short(pull-down)
rt RT-sensor ; disconnection, short(pull-down)
d1 D-sensor ; disconnection, short(pull-down)
dr R-Door Switch ; defective
dF F-Door Switch ; defective
dH Homebar (Refreshment Center) Door Switch ; defective
C1 Cycle ; abnormal or defective.
F3 Return after defrosting ; abnormal or defective
d2 Forced defrosting mode for A/S
Downloaded from Fridge-Manual.com Manuals