Change the light bulb.
Start
Freezer light filament is
disconnected or breaking ?
Connection of F door
switch is OK ?
Repair the door switch.
Check the F door switch connection and
F light socket.
Y
N
N
Y
3-3) Disconnection / breaking of Freezer Lights Wires
Change of F Lights Change of F Door Switch
Failure Checkup & Troubleshooting
Remove screw caps bottom of light
cover with a tiny tip screw driver.
Remove 2 screws of light cover.
Hold the bottom of light cover and
pull forward to remove.
Change the light bulb. (AC240V 25W)
* Follow the reverse order of
disassembling after changing the light.
Insert a flat tip screw driver
Into a gap of door switch
to pull forward.
Disconnect the housing and change
the switch for a new one.
* Be careful when changing the
switch. F and R door switch are
different in type and shape.
* Follow the reverse order of
disassembling after changing the
switch.
Page 9
1
2
3
4
3
1
2