22
1. How to start
1) Press “CRUSHED ICE” button 5 times while pressing “WATER” button.
2) Push “SUPER FREEZER” button while pressing “FREEZER SET” button at the same time.
2. Display
: Error code is displayed on 88 display LED.
3. How to stop
1) Push “RESET WATER FILTER” button 1 time.
2) It stops automatically in 4 minutes from the start.
4. All the error Codes are reset if they turn to be normal.
5. Error code
INPUT CONTROL OBJECT
CONTENTS REMARKS
Temperature Control Buttons 88 Display CLED
Display forced defrost mode for A/SD2
Display Full Down modeCo
Return after defrosting : abnormal or defectiveF3
Cycle : abnormal or defectiveC1
Full ice switch : errorEu
Drop the ice while EtEA
Micro switch : errorES
Water supply : errorE9
Horizontal switch : errorEt
Flow sensor : defectiveEF
I-sensor : disconnection (“Lo”), short (“Hi”)E1
Home bar Door Switch : defectivedH
F-Door Switch : defectivedF
R-Door Switch : defectivedr
D-sensor : disconnection (“Lo”), short (“Hi”)d1
RT-sensor : disconnection (“Lo”), short (“Hi”)rt
R-sensor : disconnection (“Lo”), short (“Hi”)r1
F-sensor : disconnection (“Lo”), short (“Hi”)F1
CONTENTSERROR CODE
4-8-2. FRS-20DD / FD, FRS-24DD / FD
To Next Page
Loading...
