2) How to check Ice Maker
HOW TO CHECK EACH PART
( Good ): 6 ~ 14 ohm
( If defective) : Change the motor
( Good ): 4.4 ~ 50 kohm
; It depends on room temperature.
( If defective) : Change the sensor
(Good)
Tact Switch Terminal Result
ON (Close) Connect Some value
OFF (Open) Disconnect No value (0)
( If defective) : Change the Switch
(Good)
Tact Switch Terminal Result
ON (Close) Connect Some value
OFF (Open) Disconnect No value (0)
( If defective) : Change the Switch
RemarkParts How to check
Level Sensor Switch
Ice Drop Motor
Full Ice Sensor Switch
Ice Sensor
Check resistance between 2 wires.
Check resistance between 2 wires.
Check resistance between reds.
Check resistance between reds.
Tact Switch
Tact Switch
37
To Next Page
Loading...
