Need help?Do you have a question about the Daewoo Rautz RM-711AUC and is the answer not in the manual?
General| Motor | DC Servo Motor |
|---|---|
| Power Supply | AC 220V, 50Hz |
| Weight | 4.5 kg |
| Type | Cassette Deck |
| Channels | 2 |
| Frequency Response | 30Hz - 16kHz |
| Signal-to-Noise Ratio | 58dB |
| Inputs | Line In |
| Outputs | Line Out, Headphones |
General guidelines for safe operation and maintenance of the appliance.
Details on power, dimensions, and impedance for the main unit and speakers.
Technical details for the cassette tape function, including speed and response.
Technical details for the CD playback function, including channels and S/N ratio.
Technical details for the radio tuner, including AM/FM frequency ranges.
Diagram illustrating the layout of controls and indicators on the top panel.
Diagram illustrating the layout of controls, inputs, and outputs on the front panel.
Diagram illustrating the connections and switches on the rear panel.
Procedures for adjusting tape speed, azimuth, and recording bias oscillator frequency.
Calibration procedures for FM and AM frequency ranges and RF tuning parameters.
Flowchart for diagnosing issues with the front panel, display, and tuner functions.
Flowchart for diagnosing power supply, audio amplifier, and sound output problems.
Flowchart for diagnosing radio reception, tuning, and speaker output issues.
Flowchart for diagnosing tape playback, recording, and motor functions.
Flowchart for diagnosing CD/MP3 playback, disc reading, and laser functions.
Flowchart for diagnosing SD card reading, playback, and interface issues.
Flowchart for diagnosing USB device reading, playback, and interface issues.
Circuit diagram detailing the MP3, CD, and USB interface components and connections.
Circuit diagram detailing the USB and SD card interface components and connections.
Circuit diagram detailing the power supply and audio amplifier stages and their components.
Circuit diagram detailing the front panel controls and tuner circuitry components.
Circuit diagram detailing the cassette tape playback and recording circuitry components.
Top-side layout of the printed circuit board for the Front and Amplifier sections.
Bottom-side layout of the printed circuit board for the Front and Amplifier sections.
Top-side layout of the printed circuit board for the CD, Tape, and SD card sections.
Bottom-side layout of the printed circuit board for the CD, Tape, and SD card sections.
List of electrical components used in the MP3 section of the PCB.
List of electrical components used in the USB/SD Card section of the PCB.
List of electrical components used in the Tape section of the PCB.
List of electrical components used in the Front section of the PCB.
List of electrical components used in the Amplifier section of the PCB.
List of electrical components used in the Speaker section of the PCB.
List of electrical components used in the Remote Control section of the PCB.
To Next Page
