Daewoo RC-350BKN - Vacuum Cleaner Parts and Operation; Hose Connection; Suction Control; Cord Rewind Button

4 5
NAMES OF PARTS AND OPERATION TECHNIQUE
HOSE CONNECTION
COMBI CREVICE NOZZLE
• Connectingthehose:insertthe
hose firmly into the hose inlet.
(“Click”)
• Disconnectingthehose:pressthe
button and pull the hose out of the
vacuum cleaner.
SUCTION CONTROL ON/OFF SWITCH
DUST METER
CORD REWIND BUTTON
• Thesuctionpowercontrolatthe
hand grip enables you to control
suction power.
• Presstheon/offswitch.
• Whenthecolourofthedust
meter changes to RED for a
long time, change the dust bag.
DUST METER
• Rewindthepowercordby
pressing the cord rewind button.
PIPE CONNECTION
STORAGE PRACTICAL PARKING
• ToConnectthenozzle,holdthe
tubesandthehandle:insertthe
narrowed section into the wide
section.
• Ifyouwanttostorethecleaner,
hitch the brush clip onto the
vacuum cleaner.
• Ifyouwanttostopvacuum
cleaning for a while, you can
place the brush clip into the rest
position.
WIDE SUCTION NOZZLE
• Use this nozzle for cleaning both
carpeted and unoncarpeted
floors. Position 2 for carpeted and
1 for noncarpeted.
restbrush clip