1 2
DESCRIPTION AND OPERATION
HOSE CONNECTION SUCTION CONTROL
•
The suction power control at
the hand grib enables you to
control suction power.
PIPE CONNECTION
•
To connect the nozzle, hold
the tubes and the handle:
insert the narrowed section
into the wide section.
WIDE SUCTION NOZZLE
•
Use this nozzle for cleaning both
carpeted and uncarpeted floors.
CORD REWIND BUTTON
•
Rewind the power cord by
pressing the cord rewind
button.
ON/OFF SWICH
POWER CONTROL SWITCH
• Turn the unit off(on) by
pressing the ON/OFF
switch button on the unit.
•
Adjust the suction power by
rotating the swich on the unit
DUST METER
•
When the color of the dust
meter is changed to RED for
long time, change the dust
bag.
DUST METER
STORAGE
• If you want to store the
cleaner, hitch the brush clip
onto the vacuum cleaner.
PRACTICAL PARKING
• Cleaning for a while, you
can place the brush clip
into the rest.
COMBI CREVICE NOZZLE
•
Connecting the hose : insert
the hose firmly into the hose
inlet ("Click")
•
Disconnecting the hose: press
the button and pull the hose
out of the vacuum cleanet.
Brush clip Rest
To Next Page
Loading...
Need help?
General
