Daewoo Refrigerator - Operating the Refrigerator; Temperature Control Settings; Quick Freezing Function; Economic Freezing Function

87
• You can use this re f r i g e rtor with variable functions as below.
F U N C T I O N
OPERATING METHOD
F R E E Z E R R E F R I G E R A T O R
R E M A R K
• For MED use
• Don’t set the “REFRIGERATOR,
TEMP. CONTROL DIAL” between
the position “MIN” and the
position “OFF”.
After 5 sec. from setting the temp.
of freezer, “FUZZY MONITOR”
displays the time again.
Push the “FREEZER TEMP.
CONTROL” button, and check the
“FUZZY MONITOR”
1. FUNCTION 1
Same as FUNCTION 1
Same as FUNCTION 3
• F: MED use.
• R: Function “OFF”.
• Don’t put foods into refrigerator.
After 5 sec. from setting the temp.
of freezer, “FUZZY MONITOR”
displays the time again.
• F: Economic freezing.
• R: MED
After 5 sec. from setting the temp.
of freezer, “FUZZY MONITOR”
displays the time again.
• F: Quick freezing
• R: MED
• Don’t set the “REFRIGERATOR
TEMP. CONTROL DIAL” between
the position “MED” and the
position “MAX”
• F: Quick freezing
• R: Function “OFF”.
• Don’t put foods into refrigerator.
• F: Economic freezing.
• R: Function “OFF”.
• Don’t put foods into refrigerator.
After 5 sec. from setting the temp.
of freezer, “FUZZY MONITOR”
displays the time again.
3. FUNCTION 3
4. FUNCTION 4
5. FUNCTION 5
6. FUNCTION 6
2. FUNCTION 2
Push the “ECONOMIC FREEZING”
button, and check the “FUZZY
M O N I T O R ”
Same as FUNCTION 5
Push “QUICK FREEZING” button and
check heater the lamp is on or not.
1. The light on display will blink to set “HOUR”
when you push the “TIME SET” button.
ex) Case of present time 10:40
HOW TO SET
HOW TO USE A CLOCK ON FUZZY MONITORUSE OF EACH COMPA RTMENT CONTROL
2. Please set “HOUR” with turning the “TIME
ADJUSTER”. Tu rn the “TIME ADJUSTER”
dial till the number “10” is set on the “FUZZY
MONITOR”. It can be set from “0” to “12”.
3. Push the “TIME SET” button, and the light on
display will blink to set “MINUTE”.
4. Please set “MINUTE” with turning the
“TIME ADJUSTER”.
Tu rn the “TIME ADJUSTER” dial till the
number “40” is set on the “FUZZY
MONITOR”. It can be set from “00” to “59”.
5. Push the “TIME SET” button.