Electrical Connections
This appliance is tted with a fused three-pin plug to BS 1363.
If the plug has to be removed, it should be cut off and carefully
disposed of immediately. To avoid a possible shock hazard, do
not insert the discarded plug into a mains socket.
Fitting a new plug
If for any reason you need to t a new plug, the exible mains
lead must be connected as shown below. The wires in the mains
lead tted to this appliance are coloured in accordance with the
following code:
Cleaning your kettle
• Do not clean your kettle in a dishwasher.
• Always disconnect the kettle from the mains power supply
before cleaning.
• Wipe clean the outside of the kettle with a soft damp cloth.
Never clean any part of the kettle with harsh or abrasive
cleaners.
• Do not submerge any part of the base, mains cable or
kettle in water or any other liquids.
Decalcication of your kettle
• The frequency of the decalcication depends on the
hardness of the water in your area and how often the
appliance is used
• If the kettle switches off before it boils or has a white
deposit building up inside then it probably needs to be
decalcied.
To Next Page
Loading...