Description of Parts
Before the first time you use your Carving Knife
• Remove all packing materials (retain the protective blade cover) and discard
responsibly.
• Wash the Blades (6) in warm soapy water, rinse and dry thoroughly.
• Do not use harsh detergents, metal or nylon brushes/scourers as these may
damage the unit.
Inserting the Blades (6)
1. Holding the Blades (6) with the dull side in the palm of
your hand, place both Blades (6) parallel to each other
with the metal pin facing in.
2. Press the Blade Grips (5) together to lock the Blades (6)
in place.
3. Grip both Blades (6) together at the Blade Grips (5) and
insert into the Motor Housing (4).
4. Ensure that the Blades (6) are firmly inserted in place by
gently pulling the Blades (6) towards you, as if you are
trying to remove.
To avoid injury it is recommended to have the protective blade
cover in place whilst following the above step.
5. The Carving Knife should now be ready to use.
To Next Page
Loading...
