3. Press the Steam Button (5), rotate the Steam Control (6) to the ‘ON’ position,
the maximum level, and make steam for 2 minutes.
4. Rotate the Steam Control (6) to the ‘OFF’ position, then press the Steam Button
(5) off to stop making steam.
5. Press the Power Button (2) to turn the unit off, leave the de-scaler
in the unit for at least 15 minutes.
6. After 15 minutes empty the water tank and refill with clean water.
7. Restart the unit and repeat the above steps - with clean water
Cleaning and Maintenance
• Expel any water that may be inside the coffee machine by turning on the
steam function for approximately 2-3 minutes, or until steam no longer comes
from the steam nozzle.
• Unplug from the mains and allow coffee
maker cool down completely before cleaning.
• Clean the outside of the espresso maker with clean damp cloth.
• Rinse the water tank out and allow to dry.
• Wash the drip tray plate and drip tray regularly and dry thoroughly.
• Never immerse the unit in water or any other liquids.
• Immediately after use pull the metal tube and rubber handle off the steam
nozzle and wash both in warm soapy water and dry thoroughly.
• Wash the measuring spoon in warm soapy water and dry thoroughly.
Clean the appliance after every use in order to keep it in good working
order.
Do not allow water to sit in the tank, empty the tank after every use.
Technical Specification
To Next Page
Loading...