Cleaning the lters
Remove the cylinder from the
vacuum cleaner as described on
the previous page.
Rotate the cylinder lid anti
clockwise while holding on to the
cylinder body and pull the cylinder
head and lter assembly away.
Remove the lter assembly from
the cylinder lid by rotating the lid
anti clockwise.
The HEPA lter is located in the
lter assembly and can be simply
pulled out.
Tap the lter assembly and lter
over a dustbin to remove excess
dust and debris
Rinse the lter, lter assembly and cylinder under warm water until
thoroughly clean.
Leave to dry for 24 hours before reassembling
Cylinder HEPA lter
Tornado F1 Upright Vacuum
FLR00049
User Manual
To Next Page
Loading...
Need help?
General
