Assembly
Align the handle pole with
the top of the vacuum
body and insert until the
screw hole in the body
aligns with the screw hole
in the pole.
Insert the screw (supplied)
using a pozidrive screwdriver
(not supplied) and tighten.
Using your vacuum cleaner
The oor head of the vacuum
cleaner can be raised or lowered
to suit the oor surface to be
cleaned.
Turn the selector dial clockwise
to raise the oor head and anti
clockwise to lower the oor head.
NOTE: Ensure the vacuum cleaner is fully assembled before use.
Tornado F1 Upright Vacuum
FLR00049
User Manual
To Next Page
Loading...
Need help?
General
